3 Series E46 M3 (S54) COUPE
23 41 005
Removing and installing/replacing actuator
(S6S 420G SMG)
Special tools required:
•
00 2 030
•
23 0 040
•
23 0 240
Note:
After completing work:
•
Proceed according to test program, refer to "Service
Functions" in DIS Tester.
•
Read out fault memory and clear fault entries.
•
Check fluid level in hydraulic system.
Necessary preliminary tasks:
•
Depressurize hydraulic system.
•
Disconnect battery, battery positive lead from battery terminal
•
Remove intake air manifold
•
Remove fan with fan impeller
•
Remove underbody protection.
•
Remove catalytic converter and intermediate pipes
Remove middle heat shield (1).
RA Removing and installing/replacing actuator (S6S 420G SMG)
BMW AG - TIS
16.02.2013 15:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -