3 Series E46 M3 (S54) COUPE
Coat rubber-coated bearing seat of center mount (2) with
Circolight.
Circolight, refer to BMW Parts Service.
Using special tool 33 3 202 / 33 3 203 , press new deep-
groove ball bearing (1) into center mount (2).
Force center mount (1) onto propeller shaft. Collar (2) must
point to universal joint (3). Drive center mount firmly home with
special tool 23 1 160 .
Install new snap ring (1) with plate to mount.
Screw threaded ring (1) off propeller shaft. If necessary, use
special tool 26 1 040 as an aid.
RA Replacing grooved ball bearing in center mount of propeller shaft
BMW AG - TIS
16.02.2013 15:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
