3 Series E46 M3 (S54) COUPE
51 12 000
Removing and installing complete rear
bumper (M3)
Remove trim on rear bumper trim.
Unfasten screws (1).
Installation:
Tightening torque, 51 12 2AZ .
Release screw (1) on left/right on wheel arch trim (2).
Release expansion rivet (1) on left/right.
Lift out wheel arch finisher (2) on left/right and pull bumper (3) a
little to rear.
Without PDC:
All except Convertible with TV:
Pull off bumper (3) towards rear.
RA Removing and installing complete rear bumper (M3)
BMW AG - TIS
16.02.2013 20:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -