3 Series E90 318d (N47) SAL
11 24 571
Replacing all connecting rod bearings (N47,
N47S)
Special tools required:
•
00 2 590
•
00 9 120
•
11 2 110
Necessary preliminary tasks:
•
Removing all pistons
Important!
The connecting rod bearing shells for the connecting rod and
the connecting rod bearing cap are different.
Replace connecting rod bolts.
Insert one blue and one red bearing shell for each connecting rod
(irrespective of the colour coding on the connecting rod shaft).
Important!
Note grinding stages on crankshaft.
RA Replacing all connecting rod bearings (N47, N47S)
BMW AG - TIS
20.01.2013 08:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -