3 Series E90 318d (N47) SAL
Position tensioning rail (1).
Screw in mounting studs (2).
Tightening torque: 11 11 3AZ
.
Clean sealing surface (1).
Secure hydraulic chain tensioner (1) at bottom with two screws.
Tightening torque: 11 11 4AZ
.
Remove special tool 11 4 120 .
Position tensioning rail (1) for cylinder head.
Screw in mounting studs (2).
Tightening torque: 11 11 3AZ
.
RA Replacing both timing chains (M47)
BMW AG - TIS
20.01.2013 08:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -