3 Series E90 318i (N46T) SAL
Apply light coat of oil to connecting-rod bearing shells.
Fit bearing caps (2) so that pairing letters match up.
Install new connecting rod bolts (1).
Secure conrod with special tool 00 9 120 .
Tightening torque 11 24 1AZ
.
Assemble engine.
RA Removing and installing/replacing all pistons (N46T)
BMW AG - TIS
22.01.2013 13:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
