3 Series E90 318i (N46T) SAL
32 41 060
Removing and installing (replacing) vane
pump for power steering (N45, N46)
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Follow instructions for working on cooling system!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Observe country-specific waste-disposal regulations
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove intake duct
•
Unclip radiator return line from fan cowl
•
Remove fluid reservoir with bracket from mounting bracket
•
Drain and dispose of coolant from radiator
•
Disconnect coolant hoses from thermostat housing and
thermostat
•
Remove belt pulley
RA Removing and installing (replacing) vane pump for power steering (N45, N46)
BMW AG - TIS
22.01.2013 15:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
