3 Series E90 318i (N46T) SAL
51 16 206
Removing and installing / replacing centre
armrest
Necessary preliminary tasks:
•
Move both front seats forwards
Important!
Grip behind trim (1) from below and release catch (2) (risk
of damage).
Pull trim (2) towards rear and release from catches (3).
Installation:
Catches (1 and 3) must not be damaged.
Guides (2) must not be damaged.
If necessary, release rear compartment fresh-air grille in order to
install trim correctly.
Note:
Open centre armrest otherwise spring (1) will be under too much
tension.
Disengage spring (1) with screwdriver (2).
Installation:
Make sure spring (1) is correctly seated.
RA Removing and installing / replacing centre armrest
BMW AG - TIS
22.01.2013 17:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
