3 Series E90 318i (N46T) SAL
51 22 225
Removing and installing/replacing inside door
opener of rear left or right door
Necessary preliminary tasks:
•
Remove rear door trim panel
Unhook Bowden cable for release lever:
-
Tighten release lever (1).
-
Lever out lock (2).
-
Detach Bowden cable (3) towards rear/top.
Installation:
For fitting, press release lever (1) fully onto door trim panel.
Note:
On initial installation there is no screw in area (A).
If necessary, release screw in area (A).
Release catches (1) and remove door opener (2).
Installation:
Repair screw must be inserted in area (A) when door opener is
installed.
Installation:
Catches (1) on door opener (2) must not be damaged.
RA Removing and installing/replacing inside door opener of rear left or right door
BMW AG - TIS
22.01.2013 17:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -