3 Series E90 318i (N46T) SAL
If replacing version with mirror lights:
Cut out premarked cutout area (1) for left/right mirror light with a
scalpel.
Important!
Ensure a clean cut so that the headliner material is not
damaged on the inside.
If replacing version with cable to inside rearview mirror:
Mark cutout (1) on roofliner.
A = Centre of roofliner
B = 14 mm
C= 20 mm
Cut out cutout (1) with scalpel.
Important!
Ensure a clean cut so that the headliner material is not
damaged on the inside.
Installation:
Installation sequence:
1.
Secure headliner with mucket
2.
Secure headliner in middle to Velcro-type fastener
3.
Snap headliner into clips at rear
4.
Insert expander rivets at front
5.
Screw down grab handles at front on left/right
6.
Screw down grab handles at rear on left/right
7.
Screw down sun visors and counter supports
8.
Add final details to vehicle
RA Removing and installing / replacing headliner (with slide/tilt sunroof)
BMW AG - TIS
22.01.2013 17:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -