3 Series E90 320d (M47T2) SAL
11 12 000
Removing and installing/sealing cylinder head
cover (M47TU / M47T2)
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Remove air cleaner element.
Remove intake air manifold.
Disconnect high-pressure lines.
Remove injectors.
Release screws and remove intake fitting.
Disconnect plug connections on air-mass flow sensor, camshaft
sensor and pressure sensor.
Release cables affected.
Detach vacuum line from vacuum chamber.
Note:
Illustrations are taken from M47.
Release retaining elements of cylinder head cover in
sequence 22 ... 1.
Remove cylinder head cover.
RA Removing and installing/sealing cylinder head cover (M47TU / M47T2)
BMW AG - TIS
23.01.2013 06:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
