3 Series E90 320d (M47T2) SAL
While turning, push special tool (2) 11 0 332 onto special
tool (1) 11 0 331 .
Fit drive belt (1) on A/C compressor.
Pull drive belt (1) with special tools 11 0 331 and 11 0 332
onto belt pulley in direction of arrow.
Installation:
Check installation position of drive belt.
Assemble engine.
RA Removing and installing/replacing drive belt (elastobelt) for A/C compressor (M4
BMW AG - TIS
23.01.2013 06:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -