3 Series E90 320d (M47T2) SAL
13 62 610
Replacing crankshaft pulse generator (M47TU
/ M57TU / M47T2 / M57T2)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Remove starter motor
Pull plug (1) off pulse generator.
Detach mating connector (2) from holder.
Unscrew bolt (3).
Remove pulse generator.
Clear DDE fault memory.
RA Replacing crankshaft pulse generator (M47TU / M57TU / M47T2 / M57T2)
BMW AG - TIS
23.01.2013 07:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -