3 Series E90 320d (M47T2) SAL
•
Unlock plug (1) by turning and disconnect
•
Do not touch pins
•
Release cable from retainers
•
Insert special tool 24 2 390 in sealing sleeve.
Operations are described in
Notes on mechatronics
Important!
Read and comply with important note.
Detach holder from transmission fluid lines on transmission sump.
Prepare special tool (1) 24 4 161 (A) with shaped section (2)
24 4 165 side (B) to (A).
Insert special tool 24 4 160 into opening of transmission housing
and clamp gently with screw (1).
Twist in screw (2) and clamp down.
Then tighten down screw (1).
RA Removing and installing automatic transmission (6HP19Z) M47T2
BMW AG - TIS
23.01.2013 08:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -