3 Series E90 320i (N43) SAL
Clean sealing face on crankcase lower half.
Replace seal (1).
Assemble engine.
Note:
Vehicles without dipstick:
•
Park vehicle on a horizontal surface.
•
Allow engine at normal operating temperature to run for 3
minutes with increased revs (min. 1000 / max. 1500 rpm).
•
Read off engine oil level in instrument cluster or on Control
Display.
•
Top up engine oil if necessary.
RA Removing and installing, sealing or replacing oil sump (N43)
BMW AG - TIS
25.01.2013 03:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -