3 Series E90 320i (N43) SAL
11 22 500
Removing and installing or replacing flywheel
(N43)
Special tools required:
•
11 4 180
•
11 9 260
Necessary preliminary tasks:
•
Clutch removed.
Block flywheel (1) with special tool 11 9 260 .
Release bolts (2) with special tool 11 4 180 .
Tightening torque: 11 22 1AZ
.
Unfasten screws and remove flywheel.
RA Removing and installing or replacing flywheel (N43)
BMW AG - TIS
25.01.2013 03:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
