3 Series E90 320i (N43) SAL
Lubricate conrod bearing shells.
Fit bearing caps (2) so that pairing letters match up.
Install new connecting rod bolts (1).
Tighten down conrods with special tool 00 9 120 .
Tightening torque 11 24 1AZ.
Assemble engine.
RA Removing and installing/replacing all pistons (N43)
BMW AG - TIS
25.01.2013 03:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -