3 Series E90 320i (N43) SAL
11 28 010
Replacing alternator drive belt (N43)
Special tools required:
•
11 3 340
Important!
Tensioning device for drive belt is under high spring pressure.
Necessary preliminary tasks:
•
Remove air intake guide.
Note:
If reusing drive belt:
Mark direction of travel and reinstall drive belt in same
direction of travel.
Check drive belt for coolant and oil residues, replace if
necessary.
If contaminated with hydraulic fluid: Replace drive belt.
RA Replacing alternator drive belt (N43)
BMW AG - TIS
25.01.2013 03:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
