3 Series E90 320i (N43) SAL
Note:
For use on the N42/N40 engine, special tool 11 6 380 must be
remachined according to sketch with a 6.2 mm dia. drill bit to a
depth of A = approx. 45 mm.
This modification has already been taken into account for
reordering.
Press valve stem seal firmly home by hand with special tool
11 6 380 .
Assemble engine.
RA Replacing all valve stem seals - cylinder head removed (N43)
BMW AG - TIS
25.01.2013 03:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -