3 Series E90 320i (N43) SAL
Important!
Left-hand threads.
Unscrew nut (1).
Press clamping rail (2) towards rear and secure with special
tool 11 3 340 .
Release screws (3).
Make a clamp out of suitable material (welding wire).
A = approx. 40 mm
A = approx. 60 mm
Using clamp (4), pull sprocket wheel (5) off oil pump shaft until it
is no longer secured on toothing.
RA Removing and installing/replacing oil pump with balancing shafts (N43)
BMW AG - TIS
25.01.2013 03:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -