3 Series E90 320i (N43) SAL
Note:
If the cutting line is not marked by a punch mark in the pipe,
determine the cutting line by means of the pipe length on the new
front silencer (1).
Carry over cutting line to faulty front silencer (1) and mark out.
Cut exhaust pipe at marked point with special tool 00 2 210 and
deburr.
Remove monitor sensor (1).
Remove temperature sensor (1).
RA Replacing front silencer (N43)
BMW AG - TIS
25.01.2013 04:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -