3 Series E90 320i (N43) SAL
22 11 001
Replacing right engine mount (N47/N43)
Necessary preliminary tasks:
•
Secure engine in installation position.
•
Remove underbody protection.
•
Remove right reinforcement strut (E93 only).
Disconnect vacuum hose (1) at T-piece and unclip from brackets.
Remove engine mount with vacuum hose.
Installation:
Ensure that vacuum hose can move freely.
Release screws (1) and remove engine mount (2).
Tightening torque 22 11 1AZ
.
RA Replacing right engine mount (N47/N43)
BMW AG - TIS
25.01.2013 05:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -