3 Series E90 320i (N43) SAL
51 23 100
Removing and installing/replacing right
engine hood/bonnet lock
Necessary preliminary tasks:
•
Remove front intake duct
Unclip coupling (1) from side panel.
Lever out cover (2) at coupling (1).
Lever Bowden cable (3) out of coupling (1).
Note:
The operation "Disconnect cable for hood/bonnet locks" ends
here.
Release screws (1) on bumper trim (2).
Release Bowden cable (1) from holder (2).
RA Removing and installing/replacing right engine hood/bonnet lock
BMW AG - TIS
25.01.2013 09:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -