3 Series E90 320i (N43) SAL
61 31 221
Removing and installing/replacing both
multifunction steering wheel switches
Necessary preliminary tasks:
•
Remove airbag unit
Note:
Both multifunction steering wheel switches (1) are connected to
each other by the wiring.
Disconnect plug connection (2).
Pull multifunction steering wheel switches (1) in direction of arrow
out of steering wheel.
Feed wiring out of steering wheel and remove both multifunction
steering wheel switches.
Installation:
Make sure electrical leads are correctly routed.
Installation:
Guides (2) of multifunction steering wheel switches (1) must be
correctly seated in corresponding locators (3) on steering wheel.
RA Removing and installing/replacing both multifunction steering wheel switches
BMW AG - TIS
25.01.2013 11:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -