3 Series E90 320Si (N45) SAL
Open fluid reservoir of power steering pump and draw off fluid.
Detach fluid lines on power steering pump.
Release fluid reservoir of power steering pump and tie to one side.
Unscrew left and right engine mounts.
Remove engine with special tool 11 0 000.
Important!
Only raise engine at suspension eyes provided for this
purpose.
Lift out engine slowly and carefully.
Modify engine.
Assemble engine.
Check function of DME.
RA Removing and installing engine (N45)
BMW AG - TIS
28.01.2013 06:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
