3 Series E90 320Si (N45) SAL
11 12 719
Grinding cylinder head lower face (N40 / N45)
(cylinder head dismantled)
Check evenness of cylinder head sealing surface with a standard
straight-edge (1).
Note:
Maximum plane deviation: longitudinal 0.10 mm.
Note:
Maximum plane deviation: transversal 0.05 mm.
Important!
The lower face of the cylinder head cover is not parallel to the
surface of the cylinder head gasket.
RA Grinding cylinder head lower face (N40 / N45)
BMW AG - TIS
28.01.2013 06:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
