3 Series E90 320Si (N45) SAL
11 12 000
Removing and installing/sealing cylinder head
cover (N42/N46)
Important!
Carbon cylinder head cover.
Install cylinder head cover without tension.
Necessary preliminary tasks:
•
Remove ignition coils.
•
Detach ignition coil wiring harness from cylinder head cover
and lay to one side.
•
Remove lower section of microfilter housing.
Detach ignition coil cover (1) in direction of arrow.
Unfasten screws (2).
Disconnect plug connection (1).
Disconnect plug connections (2 and 3).
Disconnect plug connection (4).
Release screw (5).
Remove spacer as well when releasing bolt (5).
Unscrew nut (6).
Disconnect plug connection (7).
Place wiring harness to one side.
RA Removing and installing/sealing cylinder head cover (N42/N46)
BMW AG - TIS
28.01.2013 06:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -