3 Series E90 320Si (N45) SAL
11 21 500
Replacing crankshaft (N40/N42/N45/N46)
Necessary preliminary tasks:
•
Remove engine.
•
Mount engine on assembly stand.
•
Remove cylinder head.
•
Remove oil sump.
•
Remove suction pipe of oil pump.
•
Remove vibration damper.
•
Remove flywheel.
•
Remove balancing shafts with oil pump.
•
Remove timing chain.
•
Remove all pistons.
Release screws (1).
Release screws (2).
Remove lower crankcase.
RA Replacing crankshaft (N40/N42/N45/N46)
BMW AG - TIS
28.01.2013 06:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
