3 Series E90 320Si (N45) SAL
In event of heavy oil carbon residue:
Carefully remove oil carbon residue from cylinder wall.
Important!
When removing and installing pistons, make sure the spray
nozzles (1) for piston cooling are not incorrectly adjusted
(risk of damage).
Release conrod bolts (1).
Remove conrod bearing cap (2).
Insert special tool 11 8 330 .
Press out conrod with piston to cylinder head side.
RA Removing and installing/replacing all pistons (N45)
BMW AG - TIS
28.01.2013 06:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
