3 Series E90 320Si (N45) SAL
Arrangement without A/C compressor:
Installation:
Fit drive belt (1), remove special tool 11 3 340 .
Arrangement with A/C compressor:
Installation:
Fit drive belt (1), remove special tool 11 3 340 .
Remove drive belt.
Assemble engine.
Check that drive belt is correctly installed.
RA Replacing alternator drive belt (N45)
BMW AG - TIS
28.01.2013 06:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
