3 Series E90 320Si (N45) SAL
11 33 050
Removing and installing/replacing all rocker
arms (N45)
Special tools required:
•
11 0 400
•
11 4 480
•
11 4 481
•
11 4 482
Important!
If the rocker arm shaft can only be removed by exerting a
large amount of force, it is necessary to replace the cylinder
head.
Necessary preliminary tasks:
•
Remove both camshafts.
•
Remove inlet and exhaust adjustment units.
Release screw plugs (1 and 2).
Tightening torque: 11 12 9AZ
.
RA Removing and installing/replacing all rocker arms (N45)
BMW AG - TIS
28.01.2013 07:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -