3 Series E90 320Si (N45) SAL
Installation:
If necessary, remove cover.
Installation:
Keep sealing faces clean and free of oil.
Replace profile seal (1).
If necessary, remove coolant thermostat.
Installation:
Keep sealing faces clean and free of oil.
Replace sealing ring.
If necessary, remove thermostat housing.
Installation:
Keep sealing faces clean and free of oil.
Replace sealing ring.
RA Removing and installing/replacing water pump (N45)
BMW AG - TIS
28.01.2013 07:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
