3 Series E90 320Si (N45) SAL
Illustration shows N42 engine.
Installation:
Pull oil separator (1) with special tool 11 9 380 fully to
manifold.
Make sure oil separator is located in guide rails on manifold.
Unscrew special tool 11 9 380 and insert nut.
Unscrew second special tool 11 9 380 and insert second nut.
Tighten down both nuts.
Assemble engine.
RA Removing and installing intake manifold (N40 / N45)
BMW AG - TIS
28.01.2013 07:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -