3 Series E90 320Si (N45) SAL
51 16 ...
Calibrating compass in interior rearview
mirror
Note:
It may be necessary to alter the magnetic deflection zone if the
vehicle is more than two ranges away from the set deflection
zone.
For numbers of magnetic deflection zone, refer to Owner's
Handbook.
If may be necessary to calibrate the compass if:
-
vehicle battery has been disconnected for an extended period
of time
-
"C" appears in compass display
-
there is no compass display
Setting magnetic deflection zone:
-
Switch ignition on.
-
Using a suitable tool (1), press pushbutton in area (A) of
mirror (2) until a number appears in compass display (B)
-
Press pushbutton repeatedly until number of desired zone
appears
-
Wait until direction display appears
-
Magnetic deflection zone is now set
Calibrating compass:
-
Switch ignition on.
-
Using a suitable tool (1), press pushbutton in area (A) of
mirror (2) until "C" appears in compass display (B)
-
Drive vehicle 2 to 3 times in a circle at approx. 10 mph
-
Calibration process is completed when direction display
appears
RA Calibrating compass in interior rearview mirror
BMW AG - TIS
29.01.2013 22:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -