3 Series E90 325xi (N53) SAL
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove underbody protection with bracket at front and rear.
•
Remove centre muffler (N53 only)
•
Remove complete exhaust system
•
Remove reinforcement plate
•
Remove front propeller shaft
•
Remove heat shields
•
Support engine
Release screws.
Remove heat shield (1).
Move selector lever to parking position "P".
Release screw (1).
Tightening torque 25 16 2AZ
.
Remove clamp (2).
Release shift cable head (3) using a screwdriver from ball head
of shift cable lever.
Installation:
Adjust selector lever.
Disconnect connector (1).
Release screws (2).
Remove retaining plate (3).
Tightening torque 24 11 2AZ
.
RA Removing and installing automatic transmission (6HP19Z) N52/N53 AWD
BMW AG - TIS
14.02.2013 19:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
