3 Series E90 325xi (N53) SAL
41 11 043
Replacing front section of left engine support
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 11 043).
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs.
Place vehicle on straightening bench.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Engine carrier, front
Mark severance cut (1) in accordance with measurement a and
cut engine carrier.
Important!
Cut outer metal sheet only.
Measurement a=130 mm from front edge of sleeve
Installation:
Weld in reinforcing panels at all severance cuts.
Open weld joints in areas (1).
RA Replacing front section of left engine support
BMW AG - TIS
14.02.2013 23:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -