3 Series E90 325xi (N53) SAL
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 100 mm from roof edge
Measurement b = approx. 375 mm from centrepoint of hole dia. 25 mm.
Open weld joints in areas (1).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffles (2).
-
Weld in reinforcing panels at all severance cuts.
Open weld joints in areas (1).
Open brazed joints in areas (2).
RA Replacing rear left side panel (partial replacement, longitudinal member cover b
BMW AG - TIS
14.02.2013 23:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -