3 Series E90 325xi (N53) SAL
51 22 330
Removing and installing/replacing window
cavity cover strip on inside rear door
Necessary preliminary tasks:
•
Remove rear door trim panel
Important!
The "Instructions on fitting window guide seals" serve as the
basis for this repair instruction and must be observed without
fail.
Pull window cavity cover strip at front (1) and rear (2) from rear
door.
Installation:
If necessary, replace faulty retainers (3).
Moisten window cavity cover strips (1 and 2) prior to fitting with
approved anti-friction agent .
Replacement with Security version:
Cut front window cavity cover strip to length on side of fixed door
window glass to 533 mm.
Cut rear window cavity cover strip (1) to length on straight
side (2) to measurement a = 153 mm.
RA Removing and installing/replacing window cavity cover strip on inside rear door
BMW AG - TIS
15.02.2013 01:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -