3 Series E90 325xi (N53) SAL
51 71 407
Replacing rear spoiler (M)
Special tools required:
•
00 9 318
Important!
The Instructions on component cementing with double-sided
adhesive tape serve as the basis for this repair instruction and
must be observed without fail.
Note:
To ensure correct bonding, it is essential to use the adhesive tape
shaped parts developed for the respective rear spoiler.
Removing rear spoiler:
Carefully detach rear spoiler (1) from rear lid with special tool
00 9 318 (assembly wedge) and hot air blower.
Important!
To avoid paintwork damage, make sure markings (1) are
only applied to adhesive tapes.
Carry over markings (1) from bottom to top of rear spoiler.
Aligning rear spoiler for installation:
RA Replacing rear spoiler (M)
BMW AG - TIS
15.02.2013 02:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -