3 Series E90 325xi (N53) SAL
E88:
Unscrew nuts (1).
Remove holder for telematics control unit / SES (2) in
direction of arrow from body.
Raise panel for luggage compartment partition (4) slightly and
feed out holder for telematics control unit / SES (2) in direction
of luggage compartment.
Release wiring harness fastener (3) from holder
for telematics control unit / SES (2).
Installation:
Make sure guides (5) are correctly seated in associated body
holders.
Make sure wiring harness is correctly laid.
Unscrew nuts (1).
Remove charging hands-free electronics and disconnect
associated plug connections.
Replacement:
•
Carry out vehicle programming/coding
•
If necessary, log mobile phone on to vehicle
RA Removing and installing/replacing hands-free charging electronics
BMW AG - TIS
15.02.2013 08:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -