3 Series E90 325xi (N53) SAL
VS-24/Geiger
Register/Index: 5
5 03 01 (734)
Vertrieb D
KDL d. VG's u.
Imp. z. Info
Datum/Date:
10/2001
New body measurement and repair system
All models
Situation:
The additional CELETTE body measurement and repair system is recommended for more
efficient body repairs. As this system does not use model-specific straightening
attachments, future investment costs will be kept to a minimum.
The measuring system can be used to measure vehicles quickly and cost-effectively. In
conjunction with the flexible fixture systems, all standard repair work can be performed. The
fixture systems are compatible with the body jigs Sevenne, Griffon and Rhone. The use of a
universal data set allows non-BMW vehicles (e.g. used cars) to be measured and repaired.
To measure vehicles without performing repair work, the measuring system is used in
conjunction with a measuring trolley. The basis for repair work are an alignment bench,
anchoring clamps for the vehicle jack supports and a pulling arm with accessories.
To make it easier to select the correct components, packages have been created which
simplify the task of ordering. These scopes have been specially designed for BMW and
MINI (R50 and R53) vehicles.
Agreement has been made with the manufacturer CELETTE so that the construction and
training in the system are included in the purchase price. This can take up to 2 days. More
detailed training is available at extra cost.
The M8S alignment bench and accessories offered until now are superseded by the
Sevenne alignment bench.
Note:
The straightening angle sets will remain available until further notice.
Procedure:
These tools will be stocked as store tools and will only be delivered to order.
SWS New body measurement and repair system All models
BMW AG - TIS
15.02.2013 18:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -