3 Series E90 328i (N51) SAL
13 62 608
Replacing radiator sensor (N51)
Warning!
Scalding hazard!
Only perform this work after engine has cooled down.
Warning!
Poisonous gases!
Only perform this work with a dust extractor.
Necessary preliminary tasks:
•
Remove fan cowl
Depiction of radiator sensor:
•
Sensor pin (1)
•
Snap hooks (2)
Cut through snap hooks of radiator sensor with a hot appliance (if
necessary, soldering iron).
Warning!
Do not inhale the poisonous gases created in the process.
Remove poisonous gases with an air extractor or fan.
Important!
When cutting through the snap hooks, do not damage the
radiator and adjoining components.
RA Replacing radiator sensor (N51)
BMW AG - TIS
16.02.2013 04:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
