3 Series E90 328i (N52K) SAL
Release fuel rail (2) and lay to one side.
Note:
Do not detach fuel line.
Release screws (1).
Tightening torque 11 61 1AZ
.
Unscrew nuts (3).
Tightening torque 11 61 2AZ
.
Raise air intake manifold approx. 10 cm.
Disconnect plug connections (1) at bottom.
Release tank vent line behind throttle valve assembly.
Installation:
Replace all seals.
Assemble engine.
RA Removing and installing air intake manifold (N52K)
BMW AG - TIS
17.02.2013 16:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -