3 Series E90 328xi (N51) SAL
51 47 490
Removing and installing/replacing front
underbody protection (AWD)
Note:
Illustration created using 330xi as an example. There may be
differences in detail in the case of other vehicle models.
Remove screws (1 to 4).
Pull underbody protection (5) forward under bumper trim (6).
Installation:
Centre underbody protection (5) and tighten down
screws (1 to 4).
RA Removing and installing/replacing front underbody protection (AWD)
BMW AG - TIS
17.02.2013 19:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -