3 Series E90 328xi (N52K) SAL
32 00 610
Adjusting toe-in and camber on front axle
Special tools required:
•
32 3 140
•
32 3 146
•
32 3 147
Important!
Changes in axle geometry caused by accidents must under
no circumstances be rectified by camber adjustment!
Note:
Camber and toe-in influence each other. Adjust the toe-in first in
order to simplify the adjustment procedure.
The centering pin may only be driven or twisted out if the camber
is outside the specified tolerance after toe adjustment.
Version with active front steering:
-
Align steering wheel
-
Set cumulative steering angle by means of the service
function "Carry out initial operation/adjustment for active front
steering" to "zero".
-
If necessary, secure with steering wheel arrester
Version without active front steering:
Move steering into straight-ahead position by means of markings
on cap (1) and steering gear (2).
Align steering wheel and secure with steering wheel arrester.
RA Adjusting toe-in and camber on front axle
BMW AG - TIS
18.02.2013 02:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -