3 Series E90 328xi (N52K) SAL
51 71 447
Removing and installing or replacing panel
for cover on left or right side member
Necessary preliminary tasks:
•
Detach wheel arch cover from front/rear side member cover
Release screws (1).
Unclip panel (1) at holders (2) in direction of arrow and remove.
Installation:
Before installation, soak holders (1) in water.
If necessary, detach holders (1) from body and fit on panel (3).
If necessary, detach grommets (2) from holders (1) and place
on body.
If necessary, replace faulty holders (1) and grommets (2).
RA Removing and installing or replacing panel for cover on left or right side membe
BMW AG - TIS
18.02.2013 08:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -