3 Series E90 328xi (N52K) SAL
72 14 ...
Removing and installing/replacing Top Tether
eyelets for child seat
Note:
Two or three Top Tether eyelets are installed, depending on the
model.
Lever out covers (1) and release screws underneath.
Remove Top Tether eyelets (2).
Tightening torque 52 24 03AZ
.
Important!
Ensure Top Tether eyelets (1) are in correct installation
position.
It must be possible for Top Tether eyelets (1) to be tilted in
the direction of head restraints (2).
RA Removing and installing/replacing Top Tether eyelets for child seat
BMW AG - TIS
18.02.2013 14:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -