3 Series E90 330i (N52) SAL
Release nut (1) and remove eccentric washer (2).
Unscrew eccentric bolt towards front and remove toe arm (3).
Installation:
Bolt head points in direction of travel.
Reinstall eccentric washer.
Replace self-locking nut.
Align eccentric screw by means of marking to rear axle carrier.
Tightening torque 33 32 7AZ
.
After installation:
•
Perform chassis alignment check
RA Removing and installing/replacing left or right toe arm
BMW AG - TIS
19.02.2013 12:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -