3 Series E90 330i (N52) SAL
After filling, remove quick-connect coupling (1) and if necessary
use the cleaning agent contained in the special tool case to clean
up the UV additive.
Further tasks:
•
Start engine.
•
Run A/C system at highest setting for 5-10 minutes in order to
ensure adequate distribution of dye in the system
•
Switch off engine
•
Check all A/C system components for possible leaks
•
Possible leaks show up in luminous green
Complete accompanying information label (1) with the relevant
data and attach in an easily visible position next to the filling
capacity information label (2).
RA Leak testing with ultraviolet additives (UV additives) (BMW leak-testing case)
BMW AG - TIS
19.02.2013 21:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -