bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

21 Preheating Relay > < 5 RA Removing And Installing_replacing Electronics Box|Page 431
Page 1
background image

12 90 100

Replacing fan for electronics box 

Necessary preliminary tasks:

Switch off ignition.

Follow instructions for disconnecting and connecting battery.

Disconnect battery ground terminal.

Detach fuse box in passenger compartment and pull back; to

do so, refer to Removing fuse box

Important!

Follow instructions for removing and installing electronic
control units.

Pull back carpet.

Release lower nut on fuse carrier holder.

Pull holder slightly towards front.

Disconnect plug connections for fan motor (1).

Release screws (2). Remove fan.

Add final details to vehicle.

Read fault memory.

RA  Replacing fan for electronics box

BMW AG - TIS

21.02.2013  07:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

21 Preheating Relay > < 5 RA Removing And Installing_replacing Electronics Box|Page 431